Thu, 16 Apr 2026 14:04:39 +0000 <![CDATA[Nieuwste producten van The HornWarehouse.com A warehouse full of air horns, melody horns, bells, callhorns and other stuff that makes noise]]> https://www.hornwarehouse.com/ <![CDATA[Gigant 70]]> Thu, 16 Apr 2026 08:42:48 +0000 <![CDATA[Fiamm Jericho 2 Blade | PTC Ø6mm]]> FIAMM Jericho 2 Blade / PTC Ø6mm
(FIA928060Z)
The FIAMM Jericho Air horn is a compact truck air horn for professional use.
Air horn with a built-in electronic valve for trucks and buses.

Fiamm offers several variants of this type of horn, where both the electrical and pneumatic connections differ.

This Jericho is equipped with a two-pin electrical connection and a Push to Connect fitting for Ø6mm air hose.

Delivery:

1x Jericho Air horn
 
Productinfo
Material PA66 , Steel
Measurements (HxWxL) 20cm x 12,5 cm x 9,5cm
Weight 390 gr.
Voltage 24v
Ampere 0,8 A
Air Pressure (Bar) 4-8 bar (amount of pressure influences dB's)
Soud Pressure (at 2m) 118 dB
Fiamm Code 928060Z
Connector Type: Two Poles / Blades
Air Connection Ø6mm tube (Push To Connect)
EU-Registration 10 ECE
28 ECE
Made In Italy
HS Code 85123090
 
 
Attention:

1. For this horn you need air on board. This must produce at least 4bar - 8bar pressure.

2. For this horn you need a 24V electrical power supply on board.
]]> Fri, 27 Mar 2026 10:34:27 +0000 <![CDATA[10mm-1/4 BSPT knee coupling]]> Knee coupling PTC for 10 millimeter tube to 1/4 BSPT (Conical)
With PTC connection for 10 mm tube and 1/4 BSPT male thread.

The external thread is conical and taped.
The housing of the coupling is nickel-plated brass.

So you can screw this right-angled coupling into a 1/4 BSP input and connect an 10 millimeter tube to it.

This coupling can be used simply by pushing the hose into the end of the coupling until it is firmly secured in place. The hose can be easily removed by pushing the ring back towards the coupling and pulling the hose out.

Abbreviations:

PTC: Push To Connect.
10mm tube: Outside diameter of the tube is 10 millimeters.
BSPT: British Standard Pipe Taper, also called Gas Thread. (Taper = conical)
Conical: Tapered, or sloping.

More information about hose sizes and threads can be found here: About Threads]]> Thu, 12 Mar 2026 07:19:22 +0000 <![CDATA[6mm-1/8 BSPT Cutting Ring Coupling]]> 6mm-1/8 BSPT Cutting Ring Coupling
Brass coupling designed to be screwed onto a metal pipe (e.g., copper, steel, brass) with an outer diameter of Ø6 mm.
At the other end of the coupling, there is a 1/8 BSPT thread.
The housing of the coupling is made of brass.

You can screw the coupling onto a pipe with an outer diameter of 6 mm.
At the other end, you can screw on another coupling with a 1/8 (internal) thread, such as a screw-on coupling with PTC for 6 mm hose (see related products).

Note: Cutting ring coupling should only be screwed onto metal pipes. Not suitable for plastic tubing!

Abbreviations and Definitions:
  • Cutting Ring Coupling: A coupling that uses a ring to clamp onto a pipe/tube when the ring is tightened with a nut.
  • Ø6 mm: Outer diameter is 6 millimetres.
  • BSPT: British Standard Pipe Tapered, also known as gas thread. (Tapered = conical)

For more information on hose sizes and screw threads, click here: About screw threads.]]> Fri, 06 Mar 2026 15:25:45 +0000 <![CDATA[10mm-1/4 BSPT Cutting Ring Coupling]]> 10mm-1/4 BSPT Cutting Ring Coupling
Brass coupling designed to be screwed onto a metal pipe (e.g., copper, steel, brass) with an outer diameter of Ø10 mm.
At the other end of the coupling, there is a 1/4 BSPT thread.
The housing of the coupling is made of brass.

You can screw the coupling onto a pipe with an outer diameter of 10 mm.
At the other end, you can screw on another coupling with a 1/4 (internal) thread, such as a screw-on coupling with PTC for 8 mm hose (see related products).

Note: Cutting ring coupling should only be screwed onto metal pipes. Not suitable for plastic tubing!

Abbreviations and Definitions:
  • Cutting Ring Coupling: A coupling that uses a ring to clamp onto a pipe/tube when the ring is tightened with a nut.
  • Ø10 mm: Outer diameter is 10 millimetres.
  • BSPT: British Standard Pipe Tapered, also known as gas thread. (Tapered = conical)

For more information on hose sizes and screw threads, click here: About screw threads.]]> Fri, 06 Mar 2026 15:18:37 +0000 <![CDATA[8mm-1/8 BSPT Cutting Ring Coupling]]> 8mm-1/8 BSPT Cutting Ring Coupling
Brass coupling designed to be screwed onto a metal pipe (e.g., copper, steel, brass) with an outer diameter of Ø8 mm.
At the other end of the coupling, there is a 1/8 BSPT thread.
The housing of the coupling is made of brass.

You can screw the coupling onto a pipe with an outer diameter of 8 mm.
At the other end, you can screw on another coupling with a 1/8 (internal) thread, such as a screw-on coupling with PTC for 8 mm hose (see related products).

Note: Cutting ring coupling should only be screwed onto metal pipes. Not suitable for plastic tubing!

Abbreviations and Definitions:
  • Cutting Ring Coupling: A coupling that uses a ring to clamp onto a pipe/tube when the ring is tightened with a nut.
  • Ø8 mm: Outer diameter is 8 millimetres.
  • BSPT: British Standard Pipe Tapered, also known as gas thread. (Tapered = conical)

For more information on hose sizes and screw threads, click here: About screw threads.]]> Fri, 06 Mar 2026 15:08:14 +0000 <![CDATA[8mm-1/4 BSPT Cutting Ring Coupling]]> 8mm-1/4 BSPT Cutting Ring Coupling
Brass coupling designed to be screwed onto a metal pipe (e.g., copper, steel, brass) with an outer diameter of Ø8 mm.
At the other end of the coupling, there is a 1/4 BSPT thread.
The housing of the coupling is made of brass.

You can screw the coupling onto a pipe with an outer diameter of 8 mm.
At the other end, you can screw on another coupling with a 1/4 (internal) thread, such as a screw-on coupling with PTC for 8 mm hose (see related products).

Note: Cutting ring coupling should only be screwed onto metal pipes. Not suitable for plastic tubing!

Abbreviations and Definitions:
  • Cutting Ring Coupling: A coupling that uses a ring to clamp onto a pipe/tube when the ring is tightened with a nut.
  • Ø8 mm: Outer diameter is 8 millimetres.
  • BSPT: British Standard Pipe Tapered, also known as gas thread. (Tapered = conical)

For more information on hose sizes and screw threads, click here: About screw threads.]]> Fri, 06 Mar 2026 14:56:18 +0000 <![CDATA[12mm-3/8 BSPT Cutting Ring Coupling]]> 12mm-3/8 BSPT Cutting Ring Coupling
Brass coupling designed to be screwed onto a metal pipe (e.g., copper, steel, brass) with an outer diameter of Ø12 mm.
At the other end of the coupling, there is a 3/8 BSPT thread.
The housing of the coupling is made of brass.

You can screw the coupling onto a pipe with an outer diameter of 12 mm.
At the other end, you can screw on another coupling with a 3/8 (internal) thread, such as a screw-on coupling with PTC for 12 mm hose (see related products).

Note: Cutting ring coupling should only be screwed onto metal pipes. Not suitable for plastic tubing!

Abbreviations and Definitions:
  • Cutting Ring Coupling: A coupling that uses a ring to clamp onto a pipe/tube when the ring is tightened with a nut.
  • Ø12 mm: Outer diameter is 12 millimetres.
  • BSPT: British Standard Pipe Tapered, also known as gas thread. (Tapered = conical)

For more information on hose sizes and screw threads, click here: About screw threads.]]> Fri, 06 Mar 2026 14:46:59 +0000 <![CDATA[10mm-3/8 BSPT Cutting Ring Coupling]]> 10mm-3/8 BSPT Cutting Ring Coupling
Brass coupling designed to be screwed onto a metal pipe (e.g., copper, steel, brass) with an outer diameter of Ø10 mm.
At the other end of the coupling, there is a 3/8 BSPT thread.
The housing of the coupling is made of brass.

You can screw the coupling onto a pipe with an outer diameter of 10 mm.
At the other end, you can screw on another coupling with a 3/8 (internal) thread, such as a screw-on coupling with PTC for 10 mm hose (see related products).

Note: Cutting ring coupling should only be screwed onto metal pipes. Not suitable for plastic tubing!

Abbreviations and Definitions:
  • Cutting Ring Coupling: A coupling that uses a ring to clamp onto a pipe/tube when the ring is tightened with a nut.
  • Ø10 mm: Outer diameter is 10 millimetres.
  • BSPT: British Standard Pipe Tapered, also known as gas thread. (Tapered = conical)

For more information on hose sizes and screw threads, click here: About screw threads.]]> Fri, 06 Mar 2026 10:28:01 +0000 <![CDATA[Falcon Eco Sound ]]> Environmentally friendly air horn

This air horn contains environmentally friendly gas in accordance with EU regulations since January 1, 2015. Eco- or environmentally friendly... Don’t worry, this air horn makes an incredible amount of noise and lasts just as long as the old (dirty) models.

Refills are available separately.

Additional notes for this air horn: Be careful, don’t do stupid things, and do not use it as a toy!

]]> Fri, 27 Feb 2026 15:05:02 +0000 <![CDATA[Gigant 65]]> Tue, 17 Feb 2026 17:41:13 +0000 <![CDATA[Gigant Duo]]> Tue, 17 Feb 2026 17:41:12 +0000 <![CDATA[Falcon Eco Gas Refill 2x 150ml]]> Mon, 09 Feb 2026 11:24:39 +0000 <![CDATA[Falcon Eco Gas 150ml]]> Mon, 09 Feb 2026 11:24:21 +0000 <![CDATA[Evenementen Signaal]]> Horn for Events
Specially for events, we have developed an installation. This installation uses a heavy ship’s horn designed for the largest seagoing vessels.

The low pitch of the horn (110 Hz) ensures the sound carries far.
Due to the size of the horn and the diaphragm housing, the sound level can reach up to 143 dB (at 1 meter).

In addition to the large horn, we can mount four other horns to create the sound of a small organ.

The horn(s) can be activated via a control pillar. The large horn can be operated using a big red button.

This air horn installation can be used for various occasions, such as:

Sports events as a starting signal
Dance and party events
Funerals as a final farewell

We rent out our installation per half-day for €250.00 + €0.50 per kilometer.
For this, we place the horn and controls at your desired location.
You can operate the signal yourself under our guidance.

Would you like more information or to reserve a date? Please contact us:

Email: info@toetershop.nl
Phone: +31 (0)23 584 8343]]> Mon, 26 Jan 2026 14:20:40 +0000